View source for IOSU syscalls

{{stub}}
There are 2 types of syscalls:

1. Syscalls using undefined ARM instruction.

2. Syscalls using ARM syscall instruction.

== Syscalls (via undefined instructions) ==
Similarly to the Wii's IOS, the IOSU uses a syscall table that is stored toward the end of the kernel area inside the main ARM binary (fw.img).

The second vector is the invalid instruction handler, which is used to implement syscalls:
 fw:FFFF0000               LDR     PC, =_reset
 fw:FFFF0004               LDR     PC, =starbuck_syscall_handler

The Starbuck syscall handler: 
 starbuck_syscall_handler
    STMFA           SP, {R0-LR}^
    MRS             R8, SPSR
    STR             R8, [SP]
    STR             LR, [SP,#0x40]
    LDR             R10, [LR,#-4]   ; R10 = E7F0XXXX  (the invalid instruction)
    BIC             R9, R10, #0xFF00
    LDR             R8, =0xE7F000F0   ; Syscall base
    CMP             R9, R8            ; Were any bits set other than the syscall number
    BNE             invalid_syscall
    MOV             R10, R10,ASR#8
    AND             R10, R10, #0xFF
    CMP             R10, #0x94        ; Max index of syscall (can possibly vary)
    BGT             return_to_caller
    MOV             R8, SP
    MOV             R11, #0x1F
    MSR             CPSR_c, R11       ; Switch to system mode and disable FIQ/IRQ
    LDR             R8, [R8,#0x44]
    LDR             R11, =syscall_stack_arg_counts
    LDR             R11, [R11,R10,LSL#2]  ; Number of args on stack for this syscall
    ADD             SP, SP, R11,LSL#2
 get_stack_arg                             
    CMP             R11, #0
    BEQ             find_syscall_and_jump
    LDR             R9, [SP,#-4]!	 ; Copy argument value
    STR             R9, [R8,#-4]!
    SUB             R11, R11, #1
    B               get_stack_arg
 find_syscall_and_jump
    MOV             SP, R8
    LDR             R11, =syscall_table
    LDR             R11, [R11,R10,LSL#2]
    MOV             LR, PC
    BX              R11
 return_to_caller
    MOV             R11, #0xDB   ; Switch to undefined mode and re-enable FIQ/IRQ
    MSR             CPSR_c, R11
    LDR             R11, [SP]
    MSR             SPSR_cxsf, R11
    MOV             LR, R0
    LDMED           SP, {R0-LR}^
    NOP
    MOV             R0, LR
    LDR             LR, [SP,#0x40]
    MOVS            PC, LR	      ; Return
 invalid_syscall
    LDR             SP, =current_thread_ctx_addr
    LDR             SP, [SP]
    STR             LR, [SP,#0x40]
    ADD             SP, SP, #0x40
    STMFD           SP, {R0-LR}^
    SUB             R0, SP, #0x40
    MOV             LR, #6	 ; STATE_FAULTED
    STR             LR, [R0,#0x50]
    LDR             SP, =debug_args_addr
    BL              debug_print  ; Illegal Instruction:tid=%d,pid=%d,pc=0x%08x,sp=0x%08x
    B               schedule_yield

Syscalls are invoked by way of the invalid instruction handler; syscalls take the form 0xE7F000F0 | (syscall_num << 8). (E.g. E7F000F0 is syscall 0, E7F036F0 is syscall 0x36, etc.).<br>
The IOSU currently has 0x94 available syscalls (the number of installed syscalls can vary between system versions).<br><br>
NOTE: Official syscall names begin with "IOS_", the rest are merely educated guesses.

{|border=1
|-
! ID # !! Internal name !! Description !! Return value
|-
| 0x00 || int IOS_CreateThread(u32 (*proc)(void* arg), void* arg, u32* stack_top, u32 stacksize, int priority, BOOL detached)  || Creates a thread (in paused state) || New threadid or error (negative value)
|-
| 0x01 || int thread_join(int threadid, u32 *returned_value) || Waits for a thread to finish executing || 0 on success
|-
| 0x02 || int thread_cancel(int threadid, u32 unk)  || Cancels an active thread || 0 on success
|-
| 0x03 || int get_tid() || Get the current thread's ID || Current threadid
|-
| 0x04 || void* access_ipc_buffer_pool() || Gets the per-thread IPC buffer pool's address || The IPC buffer pool address value
|-
| 0x05 || int get_pid() || Get the current process' ID || Current processid
|-
| 0x06 || int get_process_name(int pid, char *out_buffer, u32 out_size) || Get the specified process' name string || 0 on success
|-
| 0x07 || int IOS_StartThread(int threadid) || Resume the specified thread || 0 on success
|-
| 0x08 || int thread_suspend(int threadid) || Suspend the specified thread || 0 on success
|-
| 0x09 || int thread_yield() || Yield execution to any higher priority threads || 0 on success
|-
| 0x0A || int IOS_GetThreadPriority(int threadid) || Get the priority of the specified thread || The thread's priority or error (negative value)
|-
| 0x0B || int IOS_SetThreadPriority(int threadid, int priority) || Set the priority of the specified thread || 0 on success
|-
| 0x0C || int IOS_CreateMessageQueue(u32 *ptr, u32 n_msgs) || Create a queue at ptr, for n_msgs messages || The queue ID
|-
| 0x0D || int IOS_DestroyMessageQueue(int queueid) || Destroy a message queue || 0 on success
|-
| 0x0E || int IOS_SendMessage(int queueid, u32 message, u32 flags) || Add a message to the end queue || 0 on success
|-
| 0x0F || int IOS_JamMessage(int queueid, u32 message, u32 flags) || Add a message to the front of a queue || 0 on success
|-
| 0x10 || int IOS_ReceiveMessage(int queueid, u32 *message, u32 flags) || Fetch a message from the front of a queue || 0 on success
|-
| 0x11 || int IOS_HandleEvent(int device, int queueid, int message) || Register queueid as a handler for interrupts generated by device (sends message to queueid when device's interrupt is triggered) || 0 on success
|-
| 0x12 || int unregister_event_handler(int device) || Unregister handler for device || 0 on success
|-
| 0x13 || int IOS_CreateTimer(int time_us, int repeat_time_us, int queueid, u32 message) || Create a timer that sends a message to a queue after the elapsed period(s) || Timerid or error (negative value)
|-
| 0x14 || int IOS_RestartTimer(int timerid, int time_us, int repeat_time_us) || Restart a timer using the specified period(s) || 0 on success
|-
| 0x15 || int IOS_StopTimer(int timerid) || Pauses the specified timer || 0 on success
|-
| 0x16 || int IOS_DestroyTimer(int timerid) || Destroys the specified timer || 0 on success
|-
| 0x17 || u32 get_timestamp() || Get the current timestamp || The current timestamp value
|-
| 0x18 || u32 time_now() || Fetch the current value of the Starbuck's timer || The current value of the timer register
|-
| 0x19 || int IOS_GetUpTimeStruct(???) || || 0 on success
|-
| 0x1A || int IOS_GetUpTime64(u64 *out_buf) || Returns the current time in wide format || 0 on success
|-
| 0x1B || int set_rtc_counter(u64 *in_buf) || Sets the RTC counter used by MCP (can only be called by MCP) || 0 on success
|-
| 0x1C || int IOS_GetAbsTimeCalendar(void *out_buf) || Returns the current date and time in a 0x18 sized struct (0x00: year; 0x04: day; 0x08: month; 0x0C: hour; 0x10: minute; 0x14: second) || 0 on success
|-
| 0x1D || int IOS_GetAbsTime64(???) || || 0 on success
|-
| 0x1E || int IOS_GetAbsTimeStruct(???) || || 0 on success
|-
| 0x1F || int set_fault_behavior(int pid, u32 flag) || Enables or disables raising a panic when a system fault occurs in the specified process || 0 on success
|-
| 0x20 || int get_key_type() || Gets the key type from the OTP (only 0 is valid) || 0 on success
|-
| 0x21 || int check_jtag() || Get the current status of the JTAG || 0 if JTAG is enabled or -4 if disabled
|-
| 0x22 || int read_otp(u32 wordindex, void *out_buf, u32 size) || Read data from the OTP, this can only be used from the IOS-CRYPTO process. || 0 on success, -1 when IOUS PID isn't 3.
|-
| 0x23 || int heap_create(void *ptr, int size) || Create a new heap at ptr of size bytes || The heapid or error (negative value)
|-
| 0x24 || int IOS_CreateLocalProcessHeap(void *ptr, int size) || Create a new local process heap of size bytes || The heap ID or error (negative value)
|-
| 0x25 || int IOS_CreateCrossProcessHeap(int size) || Create a new cross process heap of size bytes || The heap ID or error (negative value)
|-
| 0x26 || int heap_destroy(int heapid) || Destroy the specified heap || 0 on success
|-
| 0x27 || void* IOS_Alloc(int heapid, u32 size) || Allocate size bytes from the specified heap || Pointer to memory
|-
| 0x28 || void* heap_alloc_aligned(int heapid, u32 size, u32 align) || Allocate size bytes from the specified heap with the requested alignment || Pointer to aligned memory
|-
| 0x29 || void IOS_Free(int heapid, void *ptr)  || Release allocated memory back to the heap || 0 on success
|-
| 0x2A || void heap_free_and_clear(int heapid, void *ptr) || Same as IOS_Free, but clears the contents of ptr || 0 on success
|-
| 0x2B || int heap_expand(int heapid, void *ptr, u32 size) || Expands an allocated memory block by size bytes || 0 on success
|-
| 0x2C || int IOS_RegisterResourceManager(const char* device, int queueid) || Registers device to the device tree, so it can be opened (from ARM and PPC) || 0 on success
|-
| 0x2D || int device_associate(const char* device, int internal_id) || Associates a device to the specified internal IOS ID || 0 on success
|-
| 0x2E || int device_set_flags(const char* device, u32 flags) || Sets some flags in the device's internal structure || 0 on success
|-
| 0x2F || int set_client_capabilities(int client_pid, int feature_id, u32 *masks) || Sets the client's capability masks/permissions (can only be called by MCP) || 0 on success
|-
| 0x30 || int clear_client_capabilities(int client_pid) || Clears the client's capability masks/permissions (can only be called by MCP) || 0 on success
|-
| 0x31 || int query_client_capabilities(int client_pid, int feature_id, void *out_buffer) || Gets the client's capability masks/permissions (out_buffer gets 0x08 bytes; mask1 and mask2) || 0 on success
|-
| 0x32 || int query_feature_id(int feature_id, int out_count, void *out_buffer) || Retrieves information associated with a feature_id (out_buffer receives out_count * 0x34 bytes structures with the client pid, busy close violations count, active TXN count and open handles count) || 0 on success
|-
| 0x33 || int IOS_Open(const char* device, int mode) || Similar to IOS_Open on PPC, except now internal to the IOSU system || Returns an fd or error (negative)
|-
| 0x34 || int IOS_Close(int fd) || Close a previously opened fd || 0 on success
|-
| 0x35 || int IOS_Read(int fd, void *buf, u32 len) || Read len bytes from fd into buf || The number of bytes read or error
|-
| 0x36 || int IOS_Write(int fd, const void *buf, u32 len) || Write len bytes to fd from buf || The number of bytes written or error
|-
| 0x37 || int IOS_Seek(int fd, int offset, int origin) || Seek to offset relative to origin || The new absolute offset or error
|-
| 0x38 || int IOS_Ioctl(int fd, u32 request, void *input_buffer, u32 input_buffer_len, void *output_buffer, u32 output_buffer_len) || Perform the requested IOCTL || Return value from IOCTL
|-
| 0x39 || int IOS_Ioctlv(int fd, u32 request, u32 vector_count_in, u32 vector_count_out, struct iovec *vector) || Perform the requested IOCTL || Return value from IOCTL
|-
| 0x3A || int IOS_OpenAsync(const char* device, int mode, int queueid, ipcmessage *message) || Async implementation of IOS_Open || 0 on success, ipcmessage is sent to the queue with the command's return value
|-
| 0x3B || int IOS_CloseAsync(int fd, int queueid, ipcmessage *message) || Async implementation of IOS_Close || 0 on success
|-
| 0x3C || int IOS_ReadAsync(int fd, void *buf, u32 len, int queueid, ipcmessage *message) || Async implementation of IOS_Read || 0 on success
|-
| 0x3D || int IOS_WriteAsync(int fd, const void *buf, u32 len, int queueid, ipcmessage *message) || Async implementation of IOS_Write || 0 on success
|-
| 0x3E || int IOS_SeekAsync(int fd, int offset int origin, int queueid, ipcmessage *message) || Async implementation of IOS_Seek || 0 on success
|-
| 0x3F || int IOS_IoctlAsync(int fd, u32 request, void *input_buffer, u32 input_buffer_len, void *output_buffer, u32 output_buffer_len, int queueid, ipcmessage *message) || Async implementation of IOS_Ioctl || 0 on success
|-
| 0x40 || int IOS_IoctlvAsync(int fd, u32 request, u32 vector_count_in, u32 vector_count_out, struct iovec *vector, int queueid, ipcmessage *message) || Async implementation of IOS_Ioctlv || 0 on success
|-
| 0x41 || int open_as_async(???) || ||
|-
| 0x42 || int write_as_async(???) || ||
|-
| 0x43 || int ipc_resume(???) || ||
|-
| 0x44 || int ipc_suspend(???) || ||
|-
| 0x45 || int ipc_svcmsg(???) || ||
|-
| 0x46 || int ipc_resume_async(???) || ||
|-
| 0x47 || int ipc_suspend_async(???) || ||
|-
| 0x48 || int ipc_svcmsg_async(???) || ||
|-
| 0x49 || int IOS_ResourceReply(void *ipc_handle, u32 result) || Reply back through the IPC handle || 0 on success
|-
| 0x4A || int set_proc_unk_params(int pid, u32 param1, u32 param2, u32 param3) || Sets some unknown parameters on the specified process' internal structure || 0 on success
|-
| 0x4B || int get_proc_unk_params(int pid, u32 *out_buf1, u32 *out_buf2) || Gets some unknown parameters from the specified process' internal structure || 0 on success
|-
| 0x4C || int ahbMemFlush(int ahb_dev) || Performs some additional checks and calls ahb_flush_from || 0 on success
|-
| 0x4D || int ahb_flush_from(int ahb_dev) || Performs AHB memory flushing || 0 on success
|-
| 0x4E || int ahb_flush_check(int ahb_dev) || Checks for valid device masks || 0 on success
|-
| 0x4F || int ahb_flush_to(int ahb_dev) || Performs AHB memory flushing || 0 on success
|-
| 0x50 || int IOS_ClearandEnable(int id) || Enables hardware interrupts (IRQs) for the specified device || 0 on success
|-
| 0x51 || int access_iobuf_pool(int unk) || Unused || Always 0
|-
| 0x52 || struct iobuf *alloc_iobuf(int unk, u32 buf_size) || Allocate an iobuf || NULL on error
|-
| 0x53 || int free_iobuf(struct iobuf *iob) || Free an allocated iobuf || 0 on success
|-
| 0x54 || void iobuf_log_header_info() || Unused || Nothing
|-
| 0x55 || void iobuf_log_buffer_info() || Unused || Nothing
|-
| 0x56 || void *extend_iobuf(struct iobuf *iob, unsigned short num) || Extend the data in the buffer by num bytes || Pointer to extended area
|-
| 0x57 || void *IOS_PushIob(struct iobuf *iob, unsigned short num) || Move head pointer num bytes towards the buffer end || Old head pointer
|-
| 0x58 || void *IOS_PullIob(struct iobuf *iob, unsigned short num) || Move head pointer num bytes towards the buffer start || Old head pointer
|-
| 0x59 || int verify_iobuf(struct iobuf *iob) || Verify if the argument points to an iobuf || 0 on success
|-
| 0x5A || struct iobuf *copy_iobuf(struct iobuf *iob) || Copy an iobuf into the pool || Itself
|-
| 0x5B || void IOS_InvalidateDCache(void *ptr, unsigned int len) || Invalidate data cache || Nothing
|-
| 0x5C || void IOS_FlushDCache(void *ptr, unsigned int len) || Flush data cache || Nothing
|-
| 0x5D || int execute_privileged(void *address) || Disables memory protection, cleans up executable memory areas and branches to the specified address || 0 on success
|-
| 0x5E || int get_unk_flags1(u32 *out_buf1, u16 *out_buf2) || Gets (u32*)out_buf1 = 0x03; (u16*)out_buf2 = 0x00 || 0 on success
|-
| 0x5F || int get_unk_flags2(u32 *out_buf1, u16 *out_buf2) || Gets (u32*)out_buf1 = 0x01; (u16*)out_buf2 = 0x00 || 0 on success
|-
| 0x60 || void* virt_to_phys(void *address) || Translate a virtual address to physical || The translated address
|-
| 0x61 || int IOS_CreateSemaphore(???) || ||
|-
| 0x62 || int IOS_WaitSemaphore(???) || ||
|-
| 0x63 || int IOS_SignalSemaphore(???) || ||
|-
| 0x64 || int IOS_DestroySemaphore(???) || ||
|-
| 0x65 || int flush_ipc_server() || Resets the ARM IPC control register's flags || 0 on success
|-
| 0x66 || int set_bsp_ready() || Tells the IOSU that BSP is ready || 0 on success
|-
| 0x67 || int check_ios_addr_range(void *address, u32 size, u32 rw_flags) || Checks an IOSU address range for read/write permissions || 0 on success
|-
| 0x68 || int check_ppc_addr_range(void *address, u32 size) || Checks if a PPC address range is registered in the IOSU's address table || 0 on success
|-
| 0x69 || int init_mem1_ppc() || Fills range 0x00000000 to 0x00002000 in MEM1 with empty PPC branches || Always 0
|-
| 0x6A || int get_iop_cpu_utilization(???) || || 0 on success
|-
| 0x6B || int get_thread_stack_info(int tid, u32 *out_buf) || Gets information on the specified thread's stack:<br>0x00(out_buf) == sys stack base<br> 0x04(out_buf) == sys stack size (0x400)<br>0x08(out_buf) == sys stack used space<br>0x0C(out_buf) == user stack base<br>0x10(out_buf) == user stack size<br>0x14(out_buf) == user stack used space || 0 on success
|-
| 0x6C || int IOS_ThreadProfileCommand(???) || || 0 on success
|-
| 0x6D || int IOS_GetThreadUtilization(???) || || 0 on success
|-
| 0x6E || int dump_thread_context(int tid, u32 *out_buf) || Dumps the specified thread's context structure || 0 on success
|-
| 0x6F || int dump_thread_profile(int tid_count, u32 *out_buf) || Dumps profiling information for each thread up to a specified count || Number of dumped threads
|-
| 0x70 || int dump_iobuf_context(int iobuf_id, u32 *out_buf) || Dumps the specified iobuf's context structure || 0 on success
|-
| 0x71 || int IOS_GetIobPoolsUtilization(int iobuf_count, u32 *out_buf) || Dumps iobuf's pools utilization for each iobuf up to a specified count || Size of each used pool 
|-
| 0x72 || int IOS_GetMessageUtilization(???) || || 0 on success
|-
| 0x73 || int get_aggregate_resource_utilization(???) || || 0 on success
|-
| 0x74 || int get_per_process_resource_utilization(???) || || 0 on success
|-
| 0x75 || int IOS_GetTimerUtilization(???) || || 0 on success
|-
| 0x76 || int IOS_GetSemaphoreUtilization(???) || || 0 on success
|-
| 0x77 || int get_heap_profile(???) || || 0 on success
|-
| 0x78 || int set_iop2x_state(u32 state) || Sets the state of an unknown feature from BSP || 0 on success
|-
| 0x79 || int set_ppc_boot_params(void *params) || Registers the supplied address as a pointer for setting up the PPC boot parameters || 0 on success
|-
| 0x7A || void get_debug_register_value() || Stores the value from LT_DEBUG register in the IOSU heap || Nothing
|-
| 0x7B || void clear_debug_register_value() || Clears the LT_DEBUG register || Nothing
|-
| 0x7C || void set_debug_register_value(u32 value) || Sets the value of the LT_DEBUG register || Nothing
|-
| 0x7D || int check_debug_flag(u32 flag) || Checks if the supplied flag is enabled in the LT_DEBUG register copy on the IOSU heap || The flag value if enabled or 0 if disabled
|-
| 0x7E || void ios_reset(int unk) || Resets the IOSU || Nothing
|-
| 0x7F || void ios_panic(char *panic_desc, u32 panic_desc_size) || Issues a system panic (with optional description string) || Nothing
|-
| 0x80 || void ios_shutdown() || Issues a shutdown request || Nothing
|-
| 0x81 || void set_panic_behavior(int flag) || Changes the system behavior on panic:<br>flag is 0 -> crash on panic<br>flag is 1 -> reset on panic<br>flag is 2 -> reset EXI as well || Nothing
|-
| 0x82 || int set_syslog_buffer(void *log_buf) || Sets up the system log buffer in the IOSU heap || 0 on success
|-
| 0x83 || int load_ppc_kernel(u32 address, u32 size) || Maps the PPC kernel image memory:<br>address == 0x08000000<br>size == 0x00120000 || 0 on success
|-
| 0x84 || int load_ppc_app(int mem_id, u32 addr1, u32 size1, u32 addr2, u32 size2) || Maps the PPC user application memory:<br>mem_id == 0x02<br>addr1 == 0x00<br>size1 == 0x00<br>addr2 == 0xA8000000<br>size2 == 0x28000000 || 0 on success
|-
| 0x85 || int set_security_level(int level) || Sets the master title security level:<br>0x1E is normal<br>0x0A is TEST<br>0x14 is unknown || 0 on success
|-
| 0x86 || int get_security_level() || Gets the master title security level || The security level
|-
| 0x87 || int get_open_resource_handles(int out_count, void *out_buffer, int pid) || Finds open resource handles for the specified pid (out_buffer receives out_count * 0x2C bytes structures with the handle number, handle path and more) || 0 on success
|-
| 0x88 || int set_main_title_sdk_version(int version) || Sets the master title's SDK/kernel version || 0 on success
|-
| 0x89 || int get_main_title_sdk_version() || Gets the master title's SDK/kernel version || The SDK/kernel version
|-
| 0x8A || int get_dynamic_heap_access(???) || || 0 on success
|-
| 0x8B || int start_gpu_config_validation(void *out_buf, u32 size, int queue_id, int unk) || Validates the current GPU configuration using a message queue. Sends a pointer that is populated by the IOSU with the GPU configuration parameters (using GPIO) || 0 on success
|-
| 0x8C || int finish_gpu_config_validation(int queue_id, bool do_panic) || Resets the buffer sent to the IOSU and invalidates the associated queue ID. Also looks for any errors raised due to a bad configuration state and throws a panic if specifically told to do so || 0 on success
|-
| 0x8D || int return_null() || Unused || Always 0
|-
| 0x8E || int get_resource_violations(???) || || 0 on success
|-
| 0x8F || int device_get_client_handles(char *dev_node) || Returns the number of client handles created in the specified dev node || The number of active client handles
|-
| 0x90 || int device_disable_registration(bool do_disable) || Prevents any future dev node from being registered || An error code (0xFFFFFFE3)
|-
| 0x91 || int get_pending_resource_requests(???) || || 0 on success
|-
| 0x92 || int load_cafe2wii() || Maps the cafe2wii image memory || 0 on success
|-
| 0x93 || void exi_reset() || Resets the EXI for the PPC side || Nothing
|}

== Syscalls (via syscall instruction) ==
These types of syscalls are created with the thumb syscall instruction. When the u16 from retaddr-0x2 matches 0xdfab(intended as thumb "svc 0xab" but ARM "svc 0xdfab" would pass too), it will just return from the exception-handler, otherwise it will do the same thing described [[IOSU|here]] for exceptions. These syscalls are [http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0471c/Bgbjhiea.html RealView semihosting operations] that allow communication with a debugger.<br>
Currently only syscall 0x04 is still used in production versions of IOSU.

<source lang="c">
MOVS r0, #syscall_number
SVC 0xAB
</source>

Register r0 takes the syscall number.<br>
Register r1 takes the first parameter.

{|border=1
|-
! ID # !! Internal name !! Description !! Return value
|-
| 0x01 || || unused  ||
|-
| 0x02 || || unused  ||
|-
| 0x03 || || unused  ||
|-
| 0x04 || write(const char *string) || Prints a null-terminated debug message || None
|-
| 0x05 || || unused  ||
|-
| 0x06 || || unused  ||
|-
| 0x07 || || unused  ||
|-
| 0x08 || || unused  ||
|-
| 0x09 || || unused  ||
|-
| 0x0A || || unused  ||
|-
| 0x0C || || unused  ||
|-
| 0x0D || || unused  ||
|-
| 0x0E || || unused  ||
|-
| 0x0F || || unused  ||
|-
| 0x10 || || unused  ||
|-
| 0x11 || || unused  ||
|-
| 0x12 || || unused  ||
|-
| 0x13 || || unused  ||
|-
| 0x15 || || unused  ||
|-
| 0x16 || || unused  ||
|-
| 0x30 || || unused  ||
|-
| 0x31 || || unused  ||
|}