Difference between revisions of "Hardware/SEEPROM"
< Hardware
Jump to navigation
Jump to search
| Line 46: | Line 46: | ||
| 0x0A0 (0x50 * 2) || 0x10 bytes || Wii U unknown key. | | 0x0A0 (0x50 * 2) || 0x10 bytes || Wii U unknown key. | ||
|- | |- | ||
| − | | 0x0B0 (0x58 * 2) || 0x10 bytes || | + | | 0x0B0 (0x58 * 2) || 0x10 bytes || This key is crypted then used to set the /dev/crypto 0x12-keyhandle keydata. Only used when some flags are set below. |
|- | |- | ||
| 0x0C0 (0x60 * 2) || 0x02 bytes || Key type (0xFFFD, 0xFFFE or 0xFFFF). | | 0x0C0 (0x60 * 2) || 0x02 bytes || Key type (0xFFFD, 0xFFFE or 0xFFFF). | ||
|- | |- | ||
| − | | 0x0C2 (0x61 * 2) || 0x6E bytes || | + | | 0x0C2 (0x61 * 2) || 0x6E bytes || This includes some flags used with 0x12-keyhandle. |
|- | |- | ||
| 0x130 (0x98 * 2) || 0x04 bytes || Unknown. | | 0x130 (0x98 * 2) || 0x04 bytes || Unknown. | ||
Revision as of 18:46, 27 February 2016
General
The Latte package contains a 93C66 (or similar) SPI EEPROM, organized as 256 16-bit words, making it twice the size of the EEPROM found in the Wii's Hollywood package. It is accessed by twiddling some of the Starbuck GPIO lines in the exact same way as it was done on the Wii's Starlet GPIO lines.
SEEPROM Contents
Most of the data here is written once at the factory and never changed, but some fields are updated fairly frequently:
| Offset (word index * 2) | Size | Description |
|---|---|---|
| 0x000 (0x00 * 2) | 0x12 bytes | Empty. |
| 0x012 (0x09 * 2) | 0x08 bytes | SEEPROM PRNG seed.
Incremented every time IOS-CRYPTO starts. Used with the OTP's RNG key and the OTP's RNG seed to setup IOSU's PRNG. |
| 0x01A (0x0D * 2) | 0x06 bytes | Empty. |
| 0x020 (0x10 * 2) | 0x04 bytes | PPC PVR (0x70010201). |
| 0x024 (0x12 * 2) | 0x06 bytes | ASCII tag. |
| 0x02A (0x15 * 2) | 0x06 bytes | Unknown. |
| 0x030 (0x18 * 2) | 0x08 bytes | ASCII tag (same as the OTP's tag). |
| 0x038 (0x1C * 2) | 0x08 bytes | Unknown. |
| 0x040 (0x20 * 2) | 0x04 bytes | ASCII tag. |
| 0x044 (0x22 * 2) | 0x02 bytes | Unknown. |
| 0x046 (0x23 * 2) | 0x02 bytes | ASCII tag. |
| 0x048 (0x24 * 2) | 0x08 bytes | Unknown. |
| 0x050 (0x28 * 2) | 0x10 bytes | Unknown. |
| 0x060 (0x30 * 2) | 0x20 bytes | Empty. |
| 0x080 (0x40 * 2) | 0x10 bytes | Wii U drive key. |
| 0x090 (0x48 * 2) | 0x10 bytes | Wii U factory key (cleared by IOS-MCP). |
| 0x0A0 (0x50 * 2) | 0x10 bytes | Wii U unknown key. |
| 0x0B0 (0x58 * 2) | 0x10 bytes | This key is crypted then used to set the /dev/crypto 0x12-keyhandle keydata. Only used when some flags are set below. |
| 0x0C0 (0x60 * 2) | 0x02 bytes | Key type (0xFFFD, 0xFFFE or 0xFFFF). |
| 0x0C2 (0x61 * 2) | 0x6E bytes | This includes some flags used with 0x12-keyhandle. |
| 0x130 (0x98 * 2) | 0x04 bytes | Unknown. |
| 0x134 (0x9A * 2) | 0x04 bytes | Unknown. |
| 0x138 (0x9C * 2) | 0x08 bytes | Unknown. |
| 0x140 (0xA0 * 2) | 0x04 bytes | slc:sys_prod.version |
| 0x144 (0xA2 * 2) | 0x04 bytes | slc:sys_prod.eeprom_version |
| 0x148 (0xA4 * 2) | 0x04 bytes | slc:sys_prod.product_area |
| 0x14C (0xA6 * 2) | 0x04 bytes | slc:sys_prod.game_region |
| 0x150 (0xA8 * 2) | 0x04 bytes | slc:sys_prod.ntsc_pal |
| 0x154 (0xAA * 2) | 0x02 bytes | slc:sys_prod.5ghz_country_code |
| 0x156 (0xAB * 2) | 0x02 bytes | slc:sys_prod.5ghz_country_code_revision |
| 0x158 (0xAC * 2) | 0x08 bytes | slc:sys_prod.code_id |
| 0x160 (0xB0 * 2) | 0x10 bytes | slc:sys_prod.serial_id |
| 0x170 (0xB8 * 2) | 0x10 bytes | slc:sys_prod.model_number |
| 0x180 (0xC0 * 2) | 0x04 bytes | Unknown. |
| 0x184 (0xC2 * 2) | 0x0C bytes | Unknown. |
| 0x190 (0xC8 * 2) | 0x10 bytes | Unknown. |
| 0x1A0 (0xD0 * 2) | 0x08 bytes | Unknown. |
| 0x1A8 (0xD4 * 2) | 0x08 bytes | ASCII tag. |
| 0x1B0 (0xD8 * 2) | 0x10 bytes | Unknown. |
| 0x1C0 (0xE0 * 2) | 0x10 bytes | NAND counter? (encrypted with Wii U SEEPROM key). |
| 0x1D0 (0xE8 * 2) | 0x10 bytes | NAND counter? (encrypted with Wii U SEEPROM key). |
| 0x1E0 (0xF0 * 2) | 0x10 bytes | NAND counter? (encrypted with Wii U SEEPROM key). |
| 0x1F0 (0xF8 * 2) | 0x10 bytes | Empty. |