Hardware/TSOP NAND

From WiiUBrew
< Hardware
Revision as of 06:58, 22 August 2015 by Shinyquagsire23 (talk | contribs) (Created page with "== Pinout == 200px|thumb|right|TSOP NAND in Wii-U - pinout The pinout is the same between NAND chips, with all pins exposed via resistors R38-R50, R15...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Pinout

TSOP NAND in Wii-U - pinout

The pinout is the same between NAND chips, with all pins exposed via resistors R38-R50, R152-154, and R148. These resistors are, however, unused on most if not all systems. Unlike most NANDs, this one has two separate 512MB banks: The first being used for vWii, and the second used for Wii U. This distinction between banks is done via the R/B and CE pins as RB1 and CE1 and RB2 and CE2 for vWii and Wii U respectively. The NAND itself can be dumped through the use of a Teensy2.0++ and the NANDway.py program commonly used to dump and restore PS3 NANDs similarly.