Changes

Hardware/Testpoints (view source)

Revision as of 08:55, 9 November 2024

31 bytes added , 08:55, 9 November 2024

Add even more pins

Line 36: Line 36:

* TP8 - U13 pin4

* TP9 - Fake Power Button (active low/pullup, pressed=0.0v, not pressed=3.3v), connected to SMC Pin33 and RTC. Eject button will also pulse this low.

−

* TP10 - ~~To video chip (and elsewhere?)~~

+

* TP10 - HDMI HPD

* TP11 - Direct to SoC, no other connections. (impedance: 0.6ohm)

* TP12 - Direct to SoC, no other connections. (impedance: 20ohm, measures: 1V?)

* TP13 - Direct to SoC, no other connections. (impedance: high)

* TP14 - Direct to SoC, no other connections. (impedance: high)

−

* TP15 - Connects to SMC Pin18, ~~regulator-related?~~

+

* TP15 - Connects to SMC Pin18, 1v adjust

−

* TP16 - Connects to SMC Pin29, ~~regulator-related?~~

+

* TP16 - Connects to SMC Pin29, 1v adjust

* TP20 - Direct to SoC, no other connections. (impedance: 1Megohm)

* TP21 - SDCard CLK (Pin5)

Line 54: Line 54:

* TP29 - SDCard VDD

* TP30 - SDCard GND

−

* TP31 - ~~Composite related?~~

+

* TP31 - Sensor Bar GND PWM

−

* TP32 - ~~Composite related?~~

+

* TP32 - Sensor Bar 12v

−

* TP33 - ~~Composite~~ related?

+

* TP33 - Sensor Bar related

−

* TP34 - ~~Connects to RAM module?~~

+

* TP34 - DRAM (U2) VREFDQ (0v7)

−

* TP35 - ~~Connects to RAM module?~~

+

* TP35 - DRAM (U2) "ZQ"

−

* TP36 - ~~Connects to RAM module?~~

+

* TP36 - DRAM (U3) VREFDQ (0v7)

−

* TP37 - Connects to SMC Pin27, ~~regulator-related?~~

+

* TP37 - Connects to SMC Pin27, 1v adjust

−

* TP38 - Connects to SMC Pin17, ~~regulator-related?~~

+

* TP38 - Connects to SMC Pin17, 1v adjust

* TP39 - Connects to SMC Pin20, front USB enable

* TP56 - Direct to SoC, no other connections. (impedance: high)

* TP57 - Direct to SoC, no other connections. (impedance: high)

−

* TP58 - ~~Connects to RAM module?~~

+

* TP58 - DRAM (U3) "ZQ"

−

* TP59 - ~~Connects to RAM module?~~

+

* TP59 - DRAM (U4) "ZQ"

−

* TP60 - ~~Connects to RAM module?~~

+

* TP60 - DRAM (U4) VREFDQ (0v7)

−

* TP61 - ~~Connects to RAM module?~~

+

* TP61 - DRAM (U5) "ZQ"

−

* TP62 - ~~Connects to RAM module?~~

+

* TP62 - DRAM (U5) VREFDQ (0v7)

* TP64 - To U1014 (comparator?) pin12

* TP65 - TP2003

Line 81: Line 81:

* TP80 - SMC Pin15, rear USB enable

* TP83 - Direct to video chip.

−

* TP84 - ~~To HDMI connector?~~

+

* TP84 - DDC I2C SDA

* TP86 - Direct to SoC, no other connections. Lots of capacitors? Reference voltage? 1.036v

* TP87 - Direct to SoC, no other connections. Lots of capacitors? Reference voltage? 0.753v

Line 88: Line 88:

* TP99 - Direct to DRH, no other connections.

* TP109 - SMC Pin16, rear USB fault

−

* TP110 - ~~Wire goes past video chip away from SoC.~~

+

* TP110 - DDC I2C SCL

−

* TP111 - To HDMI ~~connector?~~

+

* TP111 - HDMI 5v supply

* TP115 - 15V DC plug positive

* TP116 - 15V DC plug positive

Line 101: Line 101:

* TP127 - ARM/IOP power rail? 1.0v

* TP128 - ARM/IOP GND

−

* TP129 - ~~???~~ power rail, 1.15v

+

* TP129 - PPC power rail, 1.15v

−

* TP130 - ~~???~~ GND

+

* TP130 - PPC power rail GND

−

* TP132 - ~~to comparators?~~

+

* TP132 - 3v3/12v PGOOD

* TP135 - 5v power rail A

* TP136 - 12v power rail

Line 109: Line 109:

* TP138 - 3v3 power rail B

* TP139 - WiFi module 3v3

−

* TP141 - Connected to RTC. ~~Pulled up by Q1080?~~

+

* TP141 - Connected to RTC. WiFi module 3v3 enable.

* TP142 - 3v3 power rail for HDMI Encoder

* TP144 - Reset? Or functions like one when pulled down by a 3.3Kohm resistor.

* TP145 - Connection between RTC and SMC, SMC nRST, sensitive to measurement (power LED reverts to red, but SoC continues running)

−

* TP146 - SMC Pin1, to RTC, Bluetooth, and 5GHz module

+

* TP146 - SMC Pin1, to RTC, Bluetooth, and 5GHz module. Front LED blinks red when pulled low.

−

* TP147 - Connected to RTC and pin4 of U1041 (~~Comparator in?~~)

+

* TP147 - Connected to RTC and pin4 of U1041 (ABLIC). 15v PFET enable.

−

* TP148 - Connected to RTC and Q1093 gate. Makes its way to U1041 Pin13 (~~Comparator ?~~). When pulled low by 3.3kohm resistor, front LED blinks red until 15V unplug+replug.

+

* TP148 - Connected to RTC and Q1093 gate. Makes its way to U1041 Pin13 (ABLIC). When pulled low by 3.3kohm resistor, front LED blinks red until 15V unplug+replug. Must be pulled up to 3v3 by 10kOhm resistor, front LED blinks red upon pressing power.

−

* TP149 - Connected to LV5066 pin2 (EN) and RTC. ~~Regulators~~ enable~~? Pulldown resistor?~~

+

* TP149 - Connected to LV5066 pin2 (EN) and RTC. 1.5v enable.

* TP151 - Connected to transistor output, goes to SoC

* TP152 - SMC Pin35, connected to TP88. Optical power enable

* TP153 - SMC I2C SCL

* TP154 - SMC I2C SDA

−

* TP155 - SMC Pin14, WiFi module pin 14

+

* TP155 - SMC Pin14, WiFi module pin 14. When pulled low in vWii, system powers off(???)

−

* TP156 - SMC Pin23, BT module ~~pin 12~~

+

* TP156 - SMC Pin23, BT module PON signal

−

* TP157 - SMC Pin19, 5GHz module ~~pin 20~~

+

* TP157 - SMC Pin19, 5GHz module PON signal

* TP158 - 1.5v power rail A

* TP160 - GND

Lazr

31

edits