Hardware/SMC
< Hardware
General
The Wii U added a new chip to assist with power management alongside the RTC, labeled "SMC". The SMC is responsible for managing disc drive power/eject, power LED patterns, wireless resets, regulator enable/PGOOD monitoring, and possibly other unknown functionality.
Communication
SMC resides as device ID 0x50 on I2C bus 3. It communicates at 5kHz in IOS and 10KHz in Cafe2Wii?
Registers
SMC has two types of registers: Read/write and command-based. Read/write registers operate by having the register number written (1 byte), followed by either another written byte, or a 1 byte read. Command-based registers perform their action just by writing the register number (1 byte). When attempting to read a command-based register, it will read as 0xFF.
| Index | Type | Description |
|---|---|---|
| 0x00 | Command | ODD On |
| 0x01 | Command | ODD Off |
| 0x02 | Command | ODD Eject Request |
| 0x8D | Read/Write? | 00 on power on? |
| 0x8E | Read/Write? | 00 on power on? |
| 0x8F | Read/Write? | 00 on power on? |
| 0x10 | Command | ON LED on |
| 0x11 | Command | ON LED on? |
| 0x12 | Command | ON LED off |
| 0x13 | Command | ON LED pulse |
| 0x14 | Command | CC LED off |
| 0x15 | Command | CC LED on |
| 0x16 | Command | CC LED pulse |
| 0x17 | ? | ? |
| 0x18 | ? | ? |
| 0x19 | ? | ? |
| 0x1A | ? | ? |
| 0x1B | ? | ? |
| 0x1C | ? | ? |
| 0x1D | ? | ? |
| 0x1E | Command | OFF LED on |
| 0x1F | Command | OFF LED pulse |
| 0x20 | Command | bt_rst |
| 0x21 | Command | wifi_rst |
| 0x22 | Command | drc_wifi_rst |
| 0x30~0x32 | Read/Write | TimerCounter |
| 0x40 | Read | ProgramRevision (val: 0xC5) |
| 0x41 | Read | SystemEventFlag |
| 0x42 | Read | ?, read-only (val: 0x0B, 0x0A?) |
| 0x43 | Read/Write | USB Power (bitmask; front USB: 0x1, rear USB: 0x2) |
| 0x44 | Read/Write | NotificationLED |
| 0x45 | Read/Write | PowerFailureState, writable (val: 0x08) |
| 0x46 | Read/Write | WifiRstCtrl (val: 0x00) |
| 0x47 | Read | ? not writable (val: 0xFF) |
| 0x48 | Read | ? not writable (val: 0x0F) |
| 0x60 | Read/Write | LAPSSetting (val: 0x00) |
| 0x61~0x69 | Read/Write | SystemError, read-only (val: 0x00) |
| 0x69~0x70 | Read/Write | ? (val: 0x00) |
| 0x71 | Command? | Blinks the drive LED? Causes 0x1C bytes to read as 0xFF. |
| 0x72 | Read/Write | ? (val: 0x00) |
| 0x73 | Read/Write | ? changes to 0x10 when 0x74 is written to. (val: 0x00) |
| 0x74 | Read/Write | ? (val: 0x00) |
| 0x75 | Read | ? (val: 0x00) |
| 0x76 | Read | changes to 0x5 then 0xf1 when 0x74 is written to 0x00 twice. |
| 0x80~0xFF | Read/Write? | ? (val: 0x00) |
SystemEventFlag
| Bitmask | Name |
|---|---|
| 0x40 | SMC_POWER_BUTTON |
| 0x20 | SMC_EJECT_BUTTON |
| 0x10 | SMC_DISK_INSERT |
| 0x08 | SMC_TIMER |
| 0x04 | SMC_BT_IRQ |
| 0x02 | SMC_WAKE0 |
| 0x01 | SMC_WAKE1 |
NotificationLED
| Value | Name |
|---|---|
| 0x80 | ? |
| 0x40 | ? |
| 0x20 | Blue LED en |
| 0x10 | Blue LED pulse en |
| 0x08 | Red LED en |
| 0x04 | Red LED pulse en |
| 0x02 | Yellow LED en |
| 0x01 | Yellow LED pulse en |