Error display

The Error process handles fatal errors thrown by Cafe OS or IOSU, such as "There is a problem with the system memory." This is similar to the ErrDisp process on the 3DS.

The process is responsible for collecting information, creating a crash dump, writing the occurrence to the syslog and displaying an error message onscreen.

Error Types

ID	Description	Message
0	Unknown
1	General	"An error has occurred. Press and hold the POWER Button for at least four seconds to turn the console off."
2	Corruption	"There is a problem with the system memory. "For help, make a note of the error code and visit support.nintendo.com."
3	Fatal in system or USB	"There is a problem with the system memory or USB storage device. Please contact your local customer support centre, quoting the error code. For contact details, check the Wii U Important Information booklet or visit support.nintendo.com."
4	Corruption SLC	"There is a problem with the system memory. Please contact your local customer support centre, quoting the error code. For contact details, check the Wii U Important Information booklet or visit support.nintendo.com."
5	Corruption USB	"There is a problem with the USB storage device. Please contact the manufacturer of the device. Check the device's documentation for contact details."
6	Storage removed	"The USB storage device has been disconnected. Press and hold the POWER Button for at least four seconds to turn the console off, then make sure the device is connected properly. If the problem persists, the USB storage device may not be receiving enough power. Please use an AC adapter or USB Y Cable, as applicable."
7	Disc removed	"The disc has been removed. Press and hold the POWER Button for at least four seconds to turn the console off."
8	Corruption Disc	"The disc could not be read. There may be a problem with the disc drive or the disc itself. Please contact your local customer support centre, quoting the error code. For contact details, check the Wii U Important Information booklet or visit support.nintendo.com."
9	Write Protect	"Data could not be saved. The USB Storage device is write-protected. Please refer to the manual for the device and disable write-protection."