Difference between revisions of "Hardware"
Jump to navigation
Jump to search
| (3 intermediate revisions by the same user not shown) | |||
| Line 47: | Line 47: | ||
| | | | ||
*[[Hardware/Latte Registers|Latte Registers]] | *[[Hardware/Latte Registers|Latte Registers]] | ||
| − | + | *[[Hardware/AHM controller|AHM Controller]] | |
| − | *[[Hardware/Memory | + | *[[Hardware/Memory controller|Memory Controller]] |
| − | *[[Hardware/NAND | + | *[[Hardware/NAND interface|NAND Interface]] |
| − | *[[Hardware/AES | + | *[[Hardware/AES engine|AES Engine]] |
| − | *[[Hardware/SHA-1 | + | *[[Hardware/SHA-1 engine|SHA-1 Engine]] |
*[[Hardware/USB Host Controller|USB Host Controller]] | *[[Hardware/USB Host Controller|USB Host Controller]] | ||
*[[Hardware/SD Host Controller|SD Host Controller]] | *[[Hardware/SD Host Controller|SD Host Controller]] | ||
*[[Hardware/802.11 Wireless|802.11 Wireless]] | *[[Hardware/802.11 Wireless|802.11 Wireless]] | ||
| − | *[[Hardware/SATA | + | *[[Hardware/SATA controller|SATA Controller]] |
| − | |||
| | | | ||
*[[Hardware/GX2|GX2 GPU]] | *[[Hardware/GX2|GX2 GPU]] | ||
| Line 68: | Line 67: | ||
*[[Hardware/Legacy|Legacy Interfaces]] | *[[Hardware/Legacy|Legacy Interfaces]] | ||
| | | | ||
| + | *[[Hardware/eFuse|eFuse]] | ||
*[[Hardware/SEEPROM|Serial EEPROM]] | *[[Hardware/SEEPROM|Serial EEPROM]] | ||
*[[Hardware/TSOP NAND|TSOP NAND Flash]] | *[[Hardware/TSOP NAND|TSOP NAND Flash]] | ||
Latest revision as of 17:29, 31 December 2024
Processors
- CPU: IBM PowerPC based processor codenamed "Espresso". Clocked at 1243.125 MHz.
- Three Cores (nicknamed "CPU0", "CPU1", and "CPU2"), each with one thread
- GPU: AMD Radeon, package codenamed "Latte". GPU Core clocked at 549.999 MHz.
Memory
- 32MB (MEM1)
- 2GB (MEM2)
- (with 1 GB reserved for the operating system and unavailable to games, consisting of four 4 Gbit (512 MiB) DDR3-1600 memory modules, each 3.2 GB/s bandwidth for a total of 12.8 GB/s)
Storage
- 8GB (Basic) or 32GB (Deluxe/Premium) eMMC NAND (BGA) [1]
- Two 512MB NAND (TSOP48) banks, one for Wii U mode booting and one for WiiMode
- Optical disc drive supporting Wii (4.7GB/layer) and Wii U (25GB/layer) Discs
- Laser Class: Class 1 laser
- Laser Type: Semiconductor laser
- Laser Wavelength: 405 nm (Wii U), 660 nm (Wii)
- Laser Power: Max. 0.6 nW, Max. 0.9 mW
- Numeric aperture: 0.85, 0.6
- Read speed (max): 22.5MB/s
Ports and peripherals
- Up to two Wii U GamePads (connected wirelessly via WiFi) *2
- Up to four Wii Remote or Wii U Pro controllers (connected wirelessly via Bluetooth)
- Built-in 802.11b/g/n Wi-Fi capability [2]
- 2x back / 2x frontpanel USB 2.0 ports (Up to 2TB USB Mass Storage Device supported *1) [3]
- One HDMI 1.4 port [4]
- One multi A/V out
- One SD/SDHC memory card slot (Up to 32GB supported) [5]
- One Sensor Bar port
*1 requires System Software 2.0.0 or higher
*2 not yet possible in System Software 2.1.0, first Pad displays the detection of 2nd during registration, looses it's own after finishing registration of 2nd. So no Menu and Game support of two GamePads yet
edit